MOTOR JIKOV
Projects and Innovation
Projects
The MOTOR JIKOV Group a.s. takes advantage of the opportunity to tap into funds from subsidy sources of European programs. It has successfully implemented many projects not only in the field of innovative entrepreneurship support, but also in enhancing the competitiveness of companies and improving the professional qualifications of employees. Within the framework of these projects, the company has not only gained finances for technological development of its firms, but has also significantly contributed to the increase in employment throughout the entire South Bohemian region.
Innovation
The MOTOR JIKOV GROUP has a high innovative potential, capable of solving even highly demanding technical requirements.
Robotic assembly lines
The company designs and manufactures sophisticated devices and assembly lines according to customer needs with optimization for high productivity in manufacturing processes.
MOTOR JIKOV fuel stations
The MOTOR JIKOV GROUP has developed and also exclusively supplies fueling stations for compressed natural gas (CNG), intended for individuals and companies with vehicles of alternative propulsion. This project significantly saves on fuel expenses and contributes to the protection of the environment. The equipment meets high safety standards as well as challenging ecological and emission limits.
TVC - Technological Development Centre
A new project developing technological procedures and concepts for robotic workplaces for the production of high-pressure Al castings in unmanned operations with minimal manufacturing times. The goal of TVC is a continual increase in the innovative cycle of the product, especially its quality and consistency, enhanced mechanical properties and casting strength, the development of thin-walled structural castings with significant weight saving, the development of castings from new Al alloys and entirely unique foundry products with high-efficiency manufacturing process, up to 80% according to OEE (Overall Equipment Effectiveness).
Project number:CZ.01.3.10/0.0/0.0/17_101/0013738
Operation goal:Enhance the energy efficiency of the business sector__
The aim and objective of this project is the modernization of high-pressure aluminum casting facilities. Four existing high-pressure casting stations will be replaced with state-of-the-art, energy-efficient workplaces. As a result of this initiative, there will be a significant reduction in the energy consumption of the production process, paving the way for a more sustainable and cost-effective future.
Project number:CZ.01.1.02/0.0/0.0/16_092/0008887
Operation goal:Boost your company's innovation performance to reach new heights__
Discover more about the project: The goal is to establish a technological development center (TVC) for MOTOR JIKOV Fostron a.s., Formy division, focused on developing automation and robotics processes for mold and tool manufacturing in casting industries, as well as advancing autonomous production technologies that will automatically execute specific manufacturing processes.
Project number:CZ.01.1.02/0.0/0.0/15_002/0001371
Project number:CZ.03.1.52/0.0/0.0/15_021/0000053
Project number:CZ.03.1.48/0.0/0.0/15_004/0000007
Project number:CZ.01.1.02/0.0/0.0/15_002/0001395
Project number:4.1 IN04/1321
Project number:4.2 PT03/213
Project number:4.2 PT03/1140
Project number:CZ 1.07/4.1.00/33.0015
Project number:CZ.1.07/1.3.00/14.0038
Project number:CZ.01.3.10/0.0/0.0/20_370/0026059
Operation goal:Increase the energy efficiency of the business sector to drive sustainable growth and innovation.
The purpose and goal of this project is to modernize the entire electrical distribution system of the MOTOR JIKOV Group a.s. manufacturing site in České Budějovice. This will include the replacement of existing transformers and switchgear within the current transformer station buildings, along with related upgrades to high-voltage (VN) and low-voltage (NN) lines.
Project number:CZ.01.1.02/0.0/0.0/20_321/0025077
Operation goal:A proven adaptive and autonomous control system for robotic manufacturing workplaces, including the necessary HW, to be implemented at the main applicant's production sites.
The project focuses on activities in industrial research and experimental development for the creation of an adaptive and autonomous control system for robotic manufacturing operations, including essential HW (power supplies, sensors).
Project number:CZ.01.1.02/0.0/0.0/20_338/0024424
Operation goal:Expansion of the applicant's technology development center with a pilot automated control laboratory
The goal and purpose of this project is to expand the applicant's technological development center with a pilot automated inspection facility, enabling the acquisition of essential technical and technological know-how in automation inspection, and to collaborate with partners in the development of autonomous control systems.
Project number:CZ.01.3.10/0.0/0.0/19_251/0021842
Operation goal:Enhance the energy efficiency of the business sector
The aim of the project is to replace four existing machining centers with two new, more energy-efficient machining centers that offer equivalent production capacity. As a result of the implementation, there will be a significant reduction in the energy consumption of the manufacturing process.
Project number:4.2 PT03/1140
Operation goal:Boost your company's innovative capacity with our cutting-edge extension solutions.
The project aims to expand the Technological Development Center MOTOR JIKOV Slévárna a.s. (TVC), which specializes in developing innovative technological processes and methods for high-pressure casting, designing automated production systems, and developing and testing products – castings.
Project number:4.2 PT03/213
Operation goal:The establishment of the MOTOR JIKOV Foundry a.s. Technology Development Center
The project aims to establish the MOTOR JIKOV Foundry a.s. Technology Development Center, dedicated to applied research in cutting-edge technologies. This center pioneers innovative technological processes and conceptualizes manufacturing equipment to boost production efficiency, specializes in high-pressure aluminum alloy casting / castings, and innovates and tests new casting methods and products.
